The LDL-i9010 is a 10-year, sealed battery, ionization, smoke alarm with Alarm Memory and HushTM feature. The innovative design of this alarm’s automatic activation is unlike any other smoke alarm. The i9010 alarm will automatically activate when it is attached to the mounting bracket; there are no pull-tabs, no switches, everything is automatic. At the end of the alarm life, the unit will chirp, indicating the alarm is in need of replacement. The customer can use a simple tool such as a screwdriver to deactivate the unit, stopping the low battery chirp and making it safe for disposal. The sealed-in board-mounted battery will power the i9010 unit for its complete 10-year life. No replacement battery will ever be needed. The LDL-i9010 sealed battery operated smoke alarm features a self-activation mechanism making installation simple and easy. It also features HushTM feature allowing consumers to temporarily silence nuisance alarms and an End of Life Alert indicating it is time to replace the alarm. At the end of the alarm’s 10-year life, deactivation of the alarm is just as easy. Using a tool such as a small screwdriver, a deactivation switch removes power from the alarm and renders the battery safe for disposal. The alarm lockout feature mechanically prevents a deactivated unit from being mounted back on the mounting bracket. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. LED Direct Lighting strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
 
 FEATURES 
Sealed-In Lithium Battery – Sealed-in lithium power supply; no battery replacement required over the 10 year life of the alarm. Eliminates worry about battery removal or unauthorized deactivation of alarm.
Self Activation – Alarm automatically activates when attached to the mounting bracket.
Alarm Memory – Rapidly flashing LED alerts user if the alarm has sounded since the last time the test/reset button was used.
HushTM – Will temporarily silence nuisance alarms and will not allow hush mode to be activated unless the unit is in alarm mode.
Test/Reset Button – Tests unit’s circuit operation and resets memory after an alarm condition occurs.
End of Life Warning – Alarm chirps every 40-45 seconds indicating the alarm is in need of replacement.
Tamper Resist – (when activated upon installation) effective in preventing someone from removing the unit from the mounting bracket.
LED – A flashing red indicator light with four modes of operation: standby, alarm mode, hush mode, and memory set.